Explosion-proof hot water radar level sensor with flange
This radar level sensor with flange , more powerful measurement signal and higher precision. Advanced non-contact measurement, all medium with a dielectric constant greater than 1.8 can be used. The process pressure can reach 4 MPa and the process temperature can reach 250 °C. Mainly used for liquid level measurement of corrosive liquids or slurry of all storage tanks(e.g. crude oil, storage tanks for light oil, volatile liquids or slurry).
2. Product features
*Not affected by noise, steam,foam, dust, vacuum, etc.;
*Can be used to measure the level of liquid, solid medium;
*Measuring result can influenced by change of material density, working pressure,working temperature, dielectric constant departure, environment temperature change, environment pressure change, tank shape and etc.
*Choosing special dynamic increasing technology can magnify and analyze echo signal.
*Sanitary mounting is suitable for food industry
*Long distance configure function is available (increasing GSM/CDMA module)
Antenna structure:tip cone transducer
Output:4~20mA / HART
Display:4 bit LCD
Power supply:2 wire (DC24V) / 4 wire (DC24V / AC220V)
* Sun protection and rain protection measures should be taken during outdoor installation ;
* Cannot be installed above the inlet ;
* The meter cannot be installed in the middle of an arched or rounded tank top ;
* When there is an obstacle image measurement in the tank, a reflector should be added to measure normally.
Application place: pool, tank, storage, tower, trough, ketle, silo.
Application medium: water, different waste water, chemical medicament, petroleum, crude oil, liquefield petroleum gas, crude coal, coal power, coal slurry, cement, activator, ore, glass, corn and etc. liquid, solid, slurry.
7. Purchase guide
Before quotation, we need the following information:
1.Explosion level - for example, Intrinsically Safe Edition (Exia IIB T75)
2. Using enviroment
3. Measuring range
4. Measring medium - medium name, condition, temperature , dielectric constant.
5. Connection - thread type / flange type.
7. Power supply- 220V AC / 24V DC
8. Output - 4~20mA / HART
9. Or any other information,please feel free to contact us.