guided wave radar water level sensor
Guided wave radar water level sensor is a gauge based on time stroke principle, the radar wave is running at speed of light, the running time can be converted to material level signal through electric components. The sensor emit high frequency impulse and transmit along the cable, when impulse meets the material surface, it reflects back and is received by receiver inside the gauge, and converts the distance signal to material level signal.
*The tank level can be measured reliably only when the medium is between the blind zone of top and bottom.
*As a result of advanced microprocessor and unique echo processing technology, guided wave radar water level sensor is suitable for a variety of complex conditions and applications.
*Guided wave radar level instruments transmit power is very low, can be installed in a variety of metals, non-metallic container, harmless to humans and the environment.
*Customized is available here according to customers needs.
Antenna: rod type antenna
Display:4 bit LCD
Power supply:DC24V/AC220V(2 wires/4 wires)
The dimensions of guided wave radar water level sensor(unit:mm)
1. Far away from the discharge port and inlet.
2. Metal cans in the entire measuring range, not to touch the tank wall and tank bottom.
3. Cable type or rod probe the minimum distance from the tank wall ≥300mm.
4. Bottom of the probe from the tank bottom ≥30mm.
5.The minimum distance from the probe obstructions ≥200mm.
6. If the bottom of the container is a cone, you can install a central tank top.
Guided wave radar water level sensor is suitable for various ocassions.Be mainly used for coal plant, power plant, petrochemical, food and general industrial application.