BEIJING GALLOP TECHNOLOGY CO.,LTD
Categories
Contact Us
Beijing Gallop Technology Co.,Ltd
Add:Room410 Tower C, Jiahua Buiding NO.9 Shangdi 3 Street Haidian District, Beijing
Tel:+86-010-51269778
Fax:+86-010-62967939
Mobile:+86-13858586115
E-mail:13858586115@163.com

Ultrasonic Level Meter

Split Type High Quality And Reliability Ultrasonic Water Level Sensor

Split Type High Quality And Reliability Ultrasonic Water Level Sensor

Split type high quality and reliability ultrasonic water level sensor introduction Ultrasonic water level sensor is a non-contact liquid level gauge. It can be used to measure liquid level and flow in various containers or pipelines. It can also be used in the measurement of water level in......

514679033738485008.jpg

Model

GLP-7

Range

0-30m

ApplicationLiquid
Power24VDC/220VAC

Output

4-20ma /RS485/HART

Accuracy

0.5%/0.25%

Protection

IP65 /IP67/IP68

Thread size

M66 X 3

Display

 

Split type high quality and reliability ultrasonic water level sensor introduction

Ultrasonic water level sensor is a non-contact liquid level gauge. It can be used to measure liquid level and flow in various containers or pipelines. It can also be used in the measurement of water level in drains, reservoirs, rivers and lakes. It is especially suitable for sewage and corrosive applications such as urban drainage pumps. Measurement of the water level before and after the trash rack.


Split type high quality and reliability ultrasonic water level sensor detail

Original: Beijing, China

Certification: ISO9001,CE etc

Price: Negotiable

Voltage: 24VDC/ 220VAC

Payment term: 30% T/T in advance,70%T/T before delivery date

Delivery date: 3~7days, according to your order

Packing: wooden box+paper box

Market: Middle East/ Africa/ Asia/ South America/ Europe/ North America

Warranty: 1 year

MOQ: 1units

WE SUPPORT PERSONALIZED DESIGN AND OEM BASIS COOPERATION

 

Split type high quality and reliability ultrasonic water level sensor characteristics

1. Ultrasonic transmission speed is relatively stable

2. No contact with the medium, no moving parts, the electronic components only vibrate with audible frequencies, small amplitude, long instrument life;

3. Not only continuous measurement and fixed-point measurement, but also easy to provide remote measurement or remote-control signal;

4. Can measure the liquid level of high-speed or tilted liquid

 

Split type high quality and reliability ultrasonic water level sensor trouble shooting

Symptoms Causes of failure Solution

1.    Instrument does not display, does not work Power supply error wiring error Check DC24v power supply is correct Check wiring is correct

The instrument has a display, does not work level gauge is not aligned liquid level or material surface fluctuations is very large material surface is not smooth surface has a thick layer of foam liquid emptying, the bottom of the container after the material is empty is not flat out of measurement The range is adjusted by aligning the level meter, and the horizontal calibration can be used to add the plastic pipe in the container (see the installation section). Use a more large-scale level meter to add more liquid or other measurement methods. Naturally restores work after feeding and switches to a more extensive level gauge

2.    Instrument display is unstable or there is a large deviation in the measured value. Entry into the blind zone. Unstable power supply. Strong electromagnetic interference. Suppression of sound waves. Preparation of metal flanges on the level gauge. Probe surface or side contact with metal. Load level gauge or prevent over-prevention of material level. Improve the power supply to the level gauge. Connect to earth or shield to change the installation position or add plastic pipe. Use plastic flange instead. Use rubber pad to isolate metal.

 

 FAQ

1. Are you a manufacturer, trading company or a third party?

A: We are a manufacturer, and we have built up our company since 2005

2. Where is your factory located?

A: Our factory address is: Room410 TowerC Jiahua Buiding NO.9 Shangdi 3 street Haidian district Beijing

3.How can I get the product information?

A: Beijing Gallop Technology co.,ltd

Tel: 0086-010-51269778

Whatsapp no: 0086 13858586115

Website: www.gallopsensor.com

4. What is your terms of packing?
A: Generally, we pack our goods in wooden box and paper box.

5. What is your terms of payment?

A: For large order T/T 30% in advance, and 70% before delivery.  For sample and small order in 100% payment.
6. What is your terms of delivery?
A: FOB, CNF, CIF and so on.
7. How can i get the after-service?

A: We will send you the spare parts by free if the problems caused by us. If it is the men-made problems, we can provide the spare parts, but you need pay the money. and our engineer will guide you to operate and use it through the phone or the problems is so complex, we will send the engineer to your local site to help you solve it.

blob.png

blob.png

 


Hot Tags: split type high quality and reliability ultrasonic water level sensor, China, factory, customized, wholesale, cheap, low price
  • Newsletter
  • Categories
  • Contact Us
    Beijing Gallop Technology Co.,Ltd
    Add:Room410 Tower C, Jiahua Buiding NO.9 Shangdi 3 Street Haidian District, Beijing
    Tel:+86-010-51269778
    Fax:+86-010-62967939
    Mobile:+86-13858586115
    E-mail:13858586115@163.com
  • QR Code
  • Copyright © Beijing Gallop Technology Co.,Ltd All Rights Reserved.