Plug-in split type electromagnetic flow meter
The EMF8303 plug-in electromagnetic flowmeter is used to measure the flow and total amount of various conductive liquids in various sectors such as industrial, agricultural, water conservancy, environmentally-friendly sewage monitoring, and urban water supply. Compared to pipelined flow meters, the measurement of plug-in electromagnetic flowmeters is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. Adopt advanced excitation technology, low power consumption, stable zero point, strong anti-interference ability and good reliability. No additional pressure loss, requiring a small length of the straight pipe section, and relatively simple installation. The measuring range is wide, and the full-scale flow rate can be continuously set arbitrarily from 1.0m/s to 10.0m/s, and the output signal is completely linear with the flow rate.
1, The conversion display adopts 16-bit high-performance microprocessor, 2×16LCD display, convenient parameter setting and reliable programming.
2, two-way measurement system, built-in three totalizer can display: the forward flow, reverse flow and the difference between the positive and negative flow.
3, conversion display has a variety of outputs: current, pulse, digital communication, HART.
4, for large diameter pipe, DN300-1400mm.
5, sensor body and electrode are available in a variety of materials.
6, small size, light weight, convenient transportation and installation, can achieve continuous flow maintenance, disassembly.
Applicable flow pipe nominal diameter: DN200-2000mm.
Working pressure: ≤1.6MPa.
Working temperature: ≤70°C.
The upper limit of the flow rate range: 1 - 10m / s continuously adjustable
Measurement accuracy: ± 2.5%, ± 1.5%
The conductivity of the measured medium is ≥50μs/cm.
Electrode materials: 304, 304L, 316, 316L, Hastelloy, titanium (Ti), etc.
The maximum distance from the conversion display is ≤50m.
Cable: RVVP type double core shielded cable or STT3200 type four core three shielded cable