Measuring range: 0.3 to 110m
Accuracy: 0.2, 0.5, 1.0
Working temperature: -20～80°C
Output signal: two-wire 4 ~ 20mADC
Supply voltage: Standard 24VDC insensitive area: ≤±1.0%FS
Load capacity: 0-600Ω
Relative temperature: ≤85%
Protection level: IP68
Explosion-proof mark: ExiaIICT4-7.
The input type level transmitter is based on the principle that the measured hydrostatic pressure is directly proportional to the height of the liquid. The piezoresistive effect of diffusion silicon or a ceramic sensitive element converts the static pressure into an electric signal. The input level transmitter directly into the measured medium is very convenient to install and use.
Solid structure, no moving parts, high reliability, long service life High precision measurement from water, oil to paste with high viscosity, without influence of bubbling, deposition, electrical properties of measured media, wide range of Temperature compensation. It also has power inverting polarity protection and overload current limiting protection