Automatic water level detector sensor
Product show:
Application:
1. River water, reservoir water level measurement
2. Urban groundwater level measurement
3. Water treatment tank
Parameters:
Water level detector sensor | |
Voltage | Dislay:220vac ,level sensor:24VDC |
Accuracy | 1% |
Output | Lever sensor: 4-20MA , display: relay output |
Stability | ≤0.2%FS |
Medium | Water, no corrosive water |
Protection | IP68 |
Load ability | 150% |
Temperature | ≤-20℃-40℃ |
Instructions for usage:
Shape and installation
Composed of a housing, an amplifier, a terminal block, a protective cap, a hollow wire, etc.
Installation method
1. Choose a place that is easy to operate and maintain;
2, should be installed as far as possible from the vibration source;
3. Keep away from heat sources as much as possible;
4. When the input level transmitter is installed, the metal probe should sink into the bottom of the container.
Installation Precautions (Client Junction Box)
1. If the customer is wired separately, waterproof measures must be taken (such as closed junction box, etc. If it is not or relatively simple, the wire can be bent down to prevent water from entering the fault.
2. The liquid level probe is placed in the water and must be fixed and away from the water inlet.
Wiring method
Red line: power supply+; black line: 4-20MA+
