120G FM radar level gauge high-temp molten salt level meter
The antenna focuses the wave speed through the lens, has a very small reflection angle, and has strong penetrability. It can adapt to various special environments and can be used with a variety of simple button assemblies to ensure high temperature, high pressure, strong corrosion and strong dust. Accurate and stable measurements in such environments. This high-temperature molten salt level meter can be remotely controlled, with smaller size and small blind zone, suitable for small storage tube measurement. It does not contain removable mechanical components and is completely isolated from the internal volume of the container, so it is extremely stable and requires no maintenance.
* The high temperature lava level gauge antenna is heated and protected by a fluoroplastic lens. The measurement beam is narrow and easy to install.
* The process temperature can reach up to 1200 °C, is not affected by atmospheric precipitation, and is not limited by the temperature inside the container.
* For high temperature boiling liquid, high pressure liquid, crystallization liquid, reactor liquid, super corrosive liquid, low dielectric constant plastic particles and other harsh conditions, Junke stabilizes the measurement level.
Technical principle: frequency modulated continuous wave
Measurement accuracy: ±1mm
Measuring range: 0.08~120m
Ambient temperature: -60~70°C
Process temperature: standard type -60~130°C
high temperature type -60~240°C
special device -60~1200°C
Process pressure: standard type -0.1~2.0MPa
special device -0.1~10MPa
Explosion-proof grade: flameproof ExdIICT6Ga
Protection level: IP67
Signal output: 4~20mA
Solids measurement: powder, granule, block, low dielectric constant plastic particle level;
Liquid measurement: reaction kettle, large steam, foam products, crystallization products, ultra high temperature / ultra high pressure products, sanitary product level.