6.3G radar water tank level sensor
Radar water tank level sensor , advanced non-contact measurement, all media with a dielectric constant greater than 1.8 can be used. The process pressure can reach 4 MPa and the process temperature can reach 250 °C. Can be applied to sewage treatment, corrosive liquids. Mud, solid. For example, sewage pools, acid and alkali tanks, mud tanks, solid particles, small tanks.
2. Product features
*Not affected by noise, steam, dust, vacuum, etc.;
*Not affected by changes in media density, viscosity and temperature;
*Can be used to measure the level of liquid, solid medium;
*Explosion-proof certification, high degree of protection, corrosion resistance;
Output:4~20mA / HART
Power supply:2 wire (DC24V) / 4 wire (DC24V / AC220V)
Connection:thread / flange (optional)
For the installation of radar water tank level sensor
* Sun protection and rain protection measures should be taken during outdoor installation;
* Cannot be installed above the inlet
* The meter cannot be installed in the middle of an arched or rounded tank top
* When there is an obstacle image measurement in the tank, a reflector should be added to measure normally.