Radar level sensor anti-corrosion
This radar level sensor , advanced non-contact measurement with high accuracy. New matte material，can be applied to sewage treatment, corrosive liquids. Mud, solid. For example, sewage pools, acid and alkali tanks, mud tanks, solid particles, small tanks.
2. Product features
Explosion-proof certification, high degree of protection, corrosion resistance;
Sanitary mounting is suitable for food industry
Smaller dead band ,good for the measuring of tiny tank;
Shorter wavelengths for better reflection on sloping solid surfaces;
Sanitary mounting is suitable for food industry;
High frequency,it is the suitable one for the measuring of solid and low dielectric constant medium.
Antenna material: PTFE
Output:4~20mA / HART
Power supply:2 wire (DC24V) / 4 wire (DC24V / AC220V) / RS485 / Modbus
The dimensions of radar level sensor anti-corrosion(unit:mm)
* Sun protection and rain protection measures should be taken during outdoor installation;
* Cannot be installed above the inlet
* The meter cannot be installed in the middle of an arched or rounded tank top
* When there is an obstacle image measurement in the tank, a reflector should be added to measure normally.