BEIJING GALLOP TECHNOLOGY CO.,LTD
Categories
Contact Us
Beijing Gallop Technology Co.,Ltd
Add:Room410 Tower C, Jiahua Buiding NO.9 Shangdi 3 Street Haidian District, Beijing
Tel:+86-010-51269778
Fax:+86-010-62967939
Mobile:+86-13858586115
E-mail:13858586115@163.com
News
Home > News > Content
How To Install The Immersion Level Transmitter
Jan 11, 2019

When the liquid level gauge is to be installed in a stationary deep well or pool, the steel pipe with an inner diameter of about 45 mm (a few holes at different heights for water to enter the pipe) is fixed in the water, and then the input level transmitter is placed. It can be used in steel pipes. The installation direction of the transmitter is vertical, and the input installation position should be away from the liquid inlet and outlet and the agitator. In the case of large vibration, the wire can be wound on the transmitter and the steel wire can be used to prevent the cable from being broken. When measuring the liquid level of a flowing or agitated liquid, a steel pipe with an inner diameter of about 45 mm (a small hole at a different height on the opposite side of the liquid flow direction so that the water can smoothly enter the pipe) is fixed in the water, and then the input liquid level is sent. The device can be used by placing it in a steel pipe

  • Newsletter
  • Categories
  • Contact Us
    Beijing Gallop Technology Co.,Ltd
    Add:Room410 Tower C, Jiahua Buiding NO.9 Shangdi 3 Street Haidian District, Beijing
    Tel:+86-010-51269778
    Fax:+86-010-62967939
    Mobile:+86-13858586115
    E-mail:13858586115@163.com
  • QR Code
  • Copyright © Beijing Gallop Technology Co.,Ltd All Rights Reserved.