Extend Vortex Measurement to Large Pipelines Insertion Vortex Flow Meter is designed for large-diameter utility and process lines where an inline vortex body would be heavy or costly. Insertion measurement reduces mechanical work but depends on a predictable velocity profile and accurate pipe-area configuration. The format can provide practical monitoring of gas, steam or suitable liquid with a smaller process connection and serviceable sensor assembly. Representative Velocity From a Controlled Insertion Point A bluff body creates alternating vortices whose frequency is proportional to fluid velocity. The sensor converts that stable vortex signal into flow rate without gears or rotating components, supporting liquid, gas and steam measurement with low routine maintenance. Gallop lists flange, wafer, insertion and sanitary structures, pulse and 4-20 mA outputs, RS485 and HART options, and stainless steel 304 or 316L bodies. Temperature and pressure compensation can be specified when corrected gas or steam flow is required. The selected system should match the medium, velocity range, pressure, temperature and required compensation, while the body and probe materials suit the process. This page can naturally support buyer terms such as vortex shedding flow meter, gas flow transmitter, compensated flow measurement, low-maintenance flow meter and industrial process monitoring. Engineer the Mount, Profile and Retraction Method Supply inside diameter, wall thickness, insertion fitting, orientation and available straight run; set probe depth and alignment precisely and follow a controlled retraction procedure on pressurized lines. Program pipe geometry and standard conditions consistently, then validate the installed reading against a reference or energy balance before using it for allocation. Vortex technology is not ideal for very low velocity, severe pulsation, strong pipe vibration or wet gas without application review. Gas billing and custody-transfer duties require the applicable metrology approvals and should not be assumed from a general industrial configuration. The current product pages list project ordering from one unit and OEM or ODM availability. Confirm lead time, private-label scope, drawings and country-specific approvals for the selected configuration before issuing the purchase order.